Machined Goods

Oversized Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum paired with your choice of tread plate. Comfort & Control w...

CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and stator cover. I...

CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and clutch slave cy...

This product does NOT fit 2023 KTM 890's. See here for 2023 890 Mount This product does NOT fit 2024 KTM 790's. See here for 2023 890 Mount This pr...

All Fuel Fillers include a braided stainless steel tethering lanyard and billet fuel cap! Fitment: 2008 - 2018 KTM 690 Enduro & SMC 2019-ON - ...

All Fuel Fillers now include a braided stainless steel tethering lanyard and custom billet cap! Tired of removing your ignition key to access the f...

The stock brake pedals on the 690/701/700 are simply put, spaghetti. One good dump to the right and kiss your rear brakes goodbye for the rest of t...

A Heavy Duty Billet aluminum brake pedal machined for an exact fit for the KTM 790/890 Adventure R/S models as well as the Husqvarna 901 Norden. Th...

Precision machined from Billet 6061 aluminum these pedal pads are very robust and with the anodized finish they look great too. The set screws offe...

 A simple robust solution for the Husqvarna 701 that allows for a choice of bar heights and an under bar mounted Scott's Performance steering stabi...

A simple robust solution for the KTM 790/890 and Husqvarna 901** that provides an increase in handlebar height (1.0" rise) and the ability to insta...

​A two-piece part that combines a thin plate of laser cut steel, powder coated in your color choice, along with a machined piece of billet aluminum...

Machined from aircraft grade billet aluminum this rear disc guard has been designed to take a thrashing. Guaranteed not to bend or break in the har...

​Machined from 1.25" aluminum plate this rear disc guard has been designed to take a thrashing. Guaranteed not to bend or brake in the harshest env...

This listing is for those of you who already own a pair of our adventure footpegs. Replacement traction plates are now available!!  Dowel pin tract...

Say goodbye to twisted bars! A rock solid solution for the Husqvarna 701. This is simply a portion of our Scott's submount kit. You can now just pu...

Machined aluminum plate to adapt the AMPS bolt pattern to a 2-hole pattern in order to mount the Perfect Squeeze phone mount sold by Hondo Garage. ...

These riser blocks fit our Stabilizer Submount Kits. These are available stand-alone in case you want to swap out to a different height.  Includes:...

For those that have already purchased the standalone riser kit for the 790/890 and now want to add the frame bracket, tower, and pin for use with a...

Product has been modified to work with 701 Long Range models.  This product listing is for those that have purchased our 701 or 690/700 Bar Riser S...

Photos are NOT actual product...only for representation No Returns on scratch/dent products. Fitment: Husqvarna 701 Enduro & Supermoto All Yea...

A simple robust solution for the KTM 690 that allows for a choice of bar heights and an under bar mounted Scott's Performance steering stabilizer. ...

Say goodbye to twisted bars! A rock solid solution for the 2019+ KTM 690. This is simply a portion of our Scott's submount kit. You can now just pu...

DOES NOT FIT 2024 890/901 **New ECU updates that are happening on the 890/901 are rendering the bypass dongle unfit for use (ie ineffective). This ...

Hands down the most rigid setup that mounts directly to the 901 factory GPS location. Fitment: Husqvarna Norden 901 - All Years Features:  CNC m...

KTM/Husqvarna has gone to great lengths to provide a side stand sensor that cannot be tampered with.  If this sensor is to fail (or you lose the ma...

​Machined from 1.50" aircraft grade 6061T6 aluminum plate this rear disc guard has been designed to never give up. Guaranteed not to bend or brake ...

Tired of removing your ignition key to access the fuel tank just to watch the gathered dust/debris deposit itself into your fuel injection system? ...

​A two-piece part that combines a thin plate of laser cut steel, powder coated in black, along with a machined piece of billet aluminum to give you...

Back in Stock!! We are busy assembling lots of footpegs so please allow a few days before your order is shipped. Thank you for understanding Oversi...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum.  Aprilia: Aprilia 660 - All Years Features: 1...

AMPS Pattern GPS/Device Mount for 12mm Bar. A simple solid solution for mounting most gps/phone devices that utilize a mount/cradle with the AMPS b...

The factory rear axle nut on the Ducati Desert X is less than ideal. It requires a 12-point 36mm socket to remove and hauling around a 1lb (0.5kg) ...

Submount for Ducati DX converts the top clamp bolt pattern and allows mounting of a Scott's Stabilizer with minimal bar height change.   This is a ...

Overview/Installation/Useage - VIDEO The 2023+ 890 Adventure R/S/Rally got a facelift so we created a new device mount to locate your GPS/Phone/etc...

Oversized Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum paired with your choice of tread plate. Comfort & Control w...

Tired of removing your ignition key to access the fuel tank just to watch the gathered dust/debris deposit itself into your fuel injection system? ...

A Heavy Duty Billet Shift Lever with Folding Tip machined for an exact fit for the KTM 790/890 Adventure R/S models as well as the Husqvarna 901 No...

Tired of removing your ignition key to access the fuel tank just to watch the gathered dust/debris deposit itself into your fuel injection system? ...

Photos are NOT actual product...only for representation No Returns on scratch/dent products.  Fitment: 2008 - 2018 KTM 690 Enduro & SMC

Photos are NOT actual product...only for representation No Returns on scratch/dent products.  Fitment: 2019-ON - KTM 690 Enduro & SMC

Yes indeed we have another AMPs pattern product for attaching all your devices!! Very simple and minimalist top clamp that adds the necessary 30mm...

Product has been modified to work with 701 Long Range models.  This product listing is for those that have purchased Ducati Desert X Bar Riser Subm...

Yes indeed we have another AMPs pattern product for attaching all your devices!! Very simple and minimalist top clamp that adds the necessary 30mm...