Vanasche Products

Precision machined from Billet 6061 aluminum these pedal pads are very robust and with the anodized finish they look great too. The set screws offe...

Oversized Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum paired with your choice of tread plate. Comfort & Control w...

All Fuel Fillers now include a braided stainless steel tethering lanyard and custom billet cap! Tired of removing your ignition key to access the f...

CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and stator cover. I...

CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and clutch slave cy...

KTM/Husqvarna has gone to great lengths to provide a side stand sensor that cannot be tampered with.  If this sensor is to fail (or you lose the ma...

The ULTIMATE in new-aged plastic skid plates for your KTM 690, Husqvarna 701, and the GasGas700. Absolutley NO BROKEN WELD SEAMS because there aren...

​A two-piece part that combines a thin plate of laser cut steel, powder coated in your color choice, along with a machined piece of billet aluminum...

The stock brake pedals on the 690/701/700 are simply put, spaghetti. One good dump to the right and kiss your rear brakes goodbye for the rest of t...

All Fuel Fillers include a braided stainless steel tethering lanyard and billet fuel cap! Fitment: 2008 - 2018 KTM 690 Enduro & SMC 2019-ON - ...

A simple robust solution for the KTM 790/890 and Husqvarna 901** that provides an increase in handlebar height (1.0" rise) and the ability to insta...

​Machined from 1.25" aluminum plate this rear disc guard has been designed to take a thrashing. Guaranteed not to bend or brake in the harshest env...

A Heavy Duty Billet aluminum brake pedal machined for an exact fit for the KTM 790/890 Adventure R/S models as well as the Husqvarna 901 Norden. Th...

​Machined from 1.50" aircraft grade 6061T6 aluminum plate this rear disc guard has been designed to never give up. Guaranteed not to bend or brake ...

Oversized Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum paired with your choice of tread plate. Comfort & Control w...

A Heavy Duty Billet Shift Lever with Folding Tip machined for an exact fit for the KTM 790/890 Adventure R/S models as well as the Husqvarna 901 No...

 A simple robust solution for the Husqvarna 701 that allows for a choice of bar heights and an under bar mounted Scott's Performance steering stabi...

Say goodbye to twisted bars! A rock solid solution for the Husqvarna 701. This is simply a portion of our Scott's submount kit. You can now just pu...

Machined from aircraft grade billet aluminum this rear disc guard has been designed to take a thrashing. Guaranteed not to bend or break in the har...

Yes indeed we have another AMPs pattern product for attaching all your devices!! Very simple and minimalist top clamp that adds the necessary 30mm...

Say goodbye to twisted bars! A rock solid solution for the 2019+ KTM 690. This is simply a portion of our Scott's submount kit. You can now just pu...

A simple robust solution for the KTM 690 that allows for a choice of bar heights and an under bar mounted Scott's Performance steering stabilizer. ...

AMPS Pattern GPS/Device Mount for 12mm Bar. A simple solid solution for mounting most gps/phone devices that utilize a mount/cradle with the AMPS b...

​A two-piece part that combines a thin plate of laser cut steel, powder coated in black, along with a machined piece of billet aluminum to give you...

Submount for Ducati DX converts the top clamp bolt pattern and allows mounting of a Scott's Stabilizer with minimal bar height change.   This is a ...

Tired of removing your ignition key to access the fuel tank just to watch the gathered dust/debris deposit itself into your fuel injection system? ...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum.  They're Back!! After Alexander Smith took an over...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum.  Yamaha: Yamaha Tenere 700 - All Years Feature...

Solid Billet GPS/Phone/Navigation Mount purpose built to the latest KTM 890. Our goal with this redesign was simple; to create a gps mount with ang...

The factory rear axle nut on the Ducati Desert X is less than ideal. It requires a 12-point 36mm socket to remove and hauling around a 1lb (0.5kg) ...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum.  Aprilia: Aprilia Tuareg 660 - All Years Does NO...

Yes indeed we have another AMPs pattern product for attaching all your devices!! Very simple and minimalist top clamp that adds the necessary 30mm...

THIS PRODUCT HAS BEEN UPDATED TO OUR NEW ADVENTURE LOCK SYSTEM WITH ANGLE ADJUSTMENT. Fitment: Husqvarna Norden 901 - All Years All Models Solid ...

This product does NOT fit 2023 KTM 890's. See here for 2023 890 Mount This product does NOT fit 2024 KTM 790's. See here for 2024 790 Mount This pr...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum. Fitment:  KTM 390 Adventure KTM 390 Enduro R and...