Skip to content
FREE SHIPPING ON ORDERS $99+ IN USA
FREE SHIPPING ON ORDERS $149+ IN USA
Bar Riser Submount - 701

Bar Riser Submount - 701

SKU
£136.89 - £136.89
£136.89
£136.89 - £136.89
£136.89

Say goodbye to twisted bars! A rock solid solution for the Husqvarna 701.

This is simply a portion of our Scott's submount kit. You can now just purchase the riser system without the additional parts necessary for mountings a Scott's Damper. You can also add the frame bracket/tower/pin at a later time for use with the Scott's should you want to. 

Features:

  • Relaxed Ergonomics from increased bar height (15mm or 30mm)
  • Immediate confidence boost with more race inspired control/feeling
  • Two bar offsets (fwd/rwd) are achievable by flipping risers 180*
  • Narrow submount allows clearance for fork tubes allowing you to slide the forks up if front end lowering is desired
  • Solid Aluminum Cone Inserts
  • 12mm Alloy Bolts
  • Billet Machined Submount, Risers, Top Clamp all anodized in black color
  • Works with 1-1/8" diameter bars only

The factory bar setup with rubber cones, 10mm bolts, and thin aluminum components leaves much to be desired.

We replace the factory rubber cones with aluminum inserts in favor of a rigid bar setup and replace the mounting bolts with larger 12mm alloy socket head cap screws. The subplate, risers, and top clamp are machined from billet aluminum and anodized black.

Select from the two bar rise amounts listed (+15mm or +30mm). The riser blocks are reversible allowing for a forward/rearward offset.

 


Customer Reviews

Based on 16 reviews
100%
(16)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
E
Erik
Beefy and beautiful!

Bent the stock bar mount bolts and decided to beef it up with this mount. Went with the 30mm rise to eliminate my separate bar risers. Install was so much easier than anticipated. The nylon lock nut on the bottom is bigger (19mm) than stock and also thicker, which makes it much easier to get a wrench on than the 17mm stock nut which is basically recessed under the triple clamps. Love that it’s ready for a Scott’s stabilizer when I decide to commit.

One thing to note is that it came with the new top plate that has the threaded amps hole pattern, which was a nice surprise, but unfortunately I had already purchased a gps mount elsewhere which I’ll now be returning.

R
Rob Babcock
Bar riser submount

Vanasche motorsports makes the best stuff out there! My riser mount is beautiful and very high quality. I put it on my 701 enduro and it gives me loads more control and confidence when standing and also in gnarly terrain. I highly recommend. I am 6'3" and now can stand without my elbows locked. More comfortable on pavement sections as well. Will be blinging and farkling my bike with your products. Fyi am a machinist and planned to make my own parts for this bike but the quality of Vanasche is so good I will not waste my time. Thanks

T
Timothy G Green
Another quality product

Replaced a DIY riser setup that felt like it was made out of marshmallows. These are firm and give a uncompromising feel of connection to the bike, especially while standing up.

F
Francesco Baccarini
Nice but ...

Hi, I just received the kit purchased from a European dealer. Well done and really beautiful. The upper riser is slightly different from the one shown in the photo but nice. The parts seem finely sandblasted and subsequently anodized or painted (I don't know if with ceramic or powder coating). If I can afford an advice in my modest opinion they would have been even more beautiful with simple black anodizing after milling with no sandblasting. By doing so, the surface finish would have matched the original triple clamps better.

R
Robert Starkes
Bar Riser Submount on Husqvarna 701

Great quality components, straightforward installation, big improvement on riding comfort.

123