Machined Goods

Oversized Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum paired with your choice of tread plate. Comfort & Control w...

CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and stator cover. I...

CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and clutch slave cy...

This product does NOT fit 2023 KTM 890's - The new 2023 GPS mount is currently in production. Availability estimate is currently 3/25/23  This prod...

All Fuel Fillers include a braided stainless steel tethering lanyard and billet fuel cap! Fitment: 2008 - 2018 KTM 690 Enduro & SMC 2019-ON - ...

All Fuel Fillers now include a braided stainless steel tethering lanyard and custom billet cap! Tired of removing your ignition key to access the f...

The stock brake pedals on the 690/701/700 are simply put, spaghetti. One good dump to the right and kiss your rear brakes goodbye for the rest of t...

A Heavy Duty Billet aluminum brake pedal machined for an exact fit for the KTM 790/890 Adventure R/S models as well as the Husqvarna 901 Norden. Th...

Precision machined from Billet 6061 aluminum these pedal pads are very robust and with the anodized finish they look great too. The set screws offe...

 A simple robust solution for the Husqvarna 701 that allows for a choice of bar heights and an under bar mounted Scott's Performance steering stabi...

A simple robust solution for the KTM 790/890 Adventure that provides an increase in handlebar height (1.0" rise) and the ability to install an unde...

​A two-piece part that combines a thin plate of laser cut steel, powder coated in your color choice, along with a machined piece of billet aluminum...

Machined from aircraft grade billet aluminum this rear disc guard has been designed to take a thrashing. Guaranteed not to bend or break in the har...

​Machined from 1.25" aluminum plate this rear disc guard has been designed to take a thrashing. Guaranteed not to bend or brake in the harshest env...

This listing is for those of you who already own a pair of our adventure footpegs. Replacement traction plates are now available!!  Dowel pin tract...

Say goodbye to twisted bars! A rock solid solution for the Husqvarna 701. This is simply a portion of our Scott's submount kit. You can now just pu...

Machined aluminum plate to adapt the AMPS bolt pattern to a 2-hole pattern in order to mount the Perfect Squeeze phone mount sold by Hondo Garage. ...

These riser blocks fit our Stabilizer Submount Kits. These are available stand-alone in case you want to swap out to a different height.  Includes:...

For those that have already purchased the standalone riser kit for the 790/890 and now want to add the tower and pin for use with a Scott's Steerin...

Product has been modified to work with 701 Long Range models.  This product listing is for those that have purchased our 701 or 690 Bar Riser Submo...

Photos are NOT actual product...only for representation No Returns on scratch/dent products. Fitment: Husqvarna 701 Enduro & Supermoto All Yea...

PERFECT PRODUCT HERE. NO SCRATCH OR DENT. PRODUCT HAS 790 LOGO ENGRAVING SO HAS BEEN DISCOUNTED BECAUSE 890/901 RIDERS CAN'T HAVE THAT SORT OF NONS...

A simple robust solution for the KTM 690 that allows for a choice of bar heights and an under bar mounted Scott's Performance steering stabilizer. ...

Say goodbye to twisted bars! A rock solid solution for the 2019+ KTM 690. This is simply a portion of our Scott's submount kit. You can now just pu...

With the new era of over-complicated side stand sensors it is easy to be left stranded by a non-functioning safety device. Our product solves that ...

Hands down the most rigid setup that mounts directly to the 901 factory GPS location. Fitment: Husqvarna Norden 901 - All Years Features:  CNC m...

A simple robust solution that provides an increase in handlebar height (1.0" rise) for better ergonomics! Features: 1.0" Handlebar Rise (25.4mm) f...

KTM/Husqvarna has gone to great lengths to provide a side stand sensor that cannot be tampered with.  If this sensor is to fail (or you lose the ma...

​Machined from 1.50" aircraft grade 6061T6 aluminum plate this rear disc guard has been designed to never give up. Guaranteed not to bend or brake ...

Tired of removing your ignition key to access the fuel tank just to watch the gathered dust/debris deposit itself into your fuel injection system? ...

​A two-piece part that combines a thin plate of laser cut steel, powder coated in black, along with a machined piece of billet aluminum to give you...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum.  Yamaha: Yamaha Tenere 700 - All Years Feature...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum.  Aprilia: Aprilia 660 - All Years Features: 1...

AMPS Pattern GPS/Device Mount for 12mm Bar. A simple solid solution for mounting most gps/phone devices that utilize a mount/cradle with the AMPS b...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum.  Fitment: Ducati:  Desert X - All Years Featur...

The factory rear axle nut on the Ducati Desert X is less than ideal. It requires a 12-point 36mm socket to remove and hauling around a 1lb (0.5kg) ...

Submount for Ducati DX converts the top clamp bolt pattern and allows mounting of a Scott's Stabilizer with minimal bar height change.   This is a ...

Production in process. Expected availability date 3/27/23 The new 2023 890 Adventure R/S/Rally got a facelift so we created a new device mount to l...