Vanasche Products

Precision machined from Billet 6061 aluminum these pedal pads are very robust and with the anodized finish they look great too. The set screws offe...

This product does NOT fit 2023 KTM 890's - The new 2023 GPS mount is currently in production. Availability estimate is currently 3/25/23  This prod...

Oversized Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum paired with your choice of tread plate. Comfort & Control w...

CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and clutch slave cy...

All Fuel Fillers include a braided stainless steel tethering lanyard and billet fuel cap! Fitment: 2008 - 2018 KTM 690 Enduro & SMC 2019-ON - ...

All Fuel Fillers now include a braided stainless steel tethering lanyard and custom billet cap! Tired of removing your ignition key to access the f...

The stock brake pedals on the 690/701/700 are simply put, spaghetti. One good dump to the right and kiss your rear brakes goodbye for the rest of t...

The ULTIMATE in new-aged plastic skid plates for your KTM 690, Husqvarna 701, and the new GasGas700. This plate is made from 3/8" thick (9.5mm) UHM...

CNC machined from a solid piece of billet aircraft grade aluminum this case saver was built to protect your fragile engine case and stator cover. I...

​A two-piece part that combines a thin plate of laser cut steel, powder coated in your color choice, along with a machined piece of billet aluminum...

​Machined from 1.25" aluminum plate this rear disc guard has been designed to take a thrashing. Guaranteed not to bend or brake in the harshest env...

A simple robust solution for the KTM 790/890 Adventure that provides an increase in handlebar height (1.0" rise) and the ability to install an unde...

KTM/Husqvarna has gone to great lengths to provide a side stand sensor that cannot be tampered with.  If this sensor is to fail (or you lose the ma...

With the new era of over-complicated side stand sensors it is easy to be left stranded by a non-functioning safety device. Our product solves that ...

A Heavy Duty Billet aluminum brake pedal machined for an exact fit for the KTM 790/890 Adventure R/S models as well as the Husqvarna 901 Norden. Th...

Over-sized and Lowered Rally Footpegs fabricated from laser cut and machined components using high grade stainless steel. These TIG welded footpegs...

Machined from aircraft grade billet aluminum this rear disc guard has been designed to take a thrashing. Guaranteed not to bend or break in the har...

 A simple robust solution for the Husqvarna 701 that allows for a choice of bar heights and an under bar mounted Scott's Performance steering stabi...

Hands down the most rigid setup that mounts directly to the 901 factory GPS location. Fitment: Husqvarna Norden 901 - All Years Features:  CNC m...

Say goodbye to twisted bars! A rock solid solution for the Husqvarna 701. This is simply a portion of our Scott's submount kit. You can now just pu...

A simple robust solution that provides an increase in handlebar height (1.0" rise) for better ergonomics! Features: 1.0" Handlebar Rise (25.4mm) f...

​Machined from 1.50" aircraft grade 6061T6 aluminum plate this rear disc guard has been designed to never give up. Guaranteed not to bend or brake ...

Say goodbye to twisted bars! A rock solid solution for the 2019+ KTM 690. This is simply a portion of our Scott's submount kit. You can now just pu...

A simple robust solution for the KTM 690 that allows for a choice of bar heights and an under bar mounted Scott's Performance steering stabilizer. ...

Tired of removing your ignition key to access the fuel tank just to watch the gathered dust/debris deposit itself into your fuel injection system? ...

Engineered to protect upper fork legs from rock chips, roost and road debris. These guards quickly snap into place, no tools required. Choose from ...

​A two-piece part that combines a thin plate of laser cut steel, powder coated in black, along with a machined piece of billet aluminum to give you...

Pannier racks are designed to fit the new 2019-On re-designed KTM 690 Enduro. Features: Designed to mate seamlessly with PerunMoto Tail Rack 3/4" ...

AMPS Pattern GPS/Device Mount for 12mm Bar. A simple solid solution for mounting most gps/phone devices that utilize a mount/cradle with the AMPS b...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum.  Yamaha: Yamaha Tenere 700 - All Years Feature...

The factory rear axle nut on the Ducati Desert X is less than ideal. It requires a 12-point 36mm socket to remove and hauling around a 1lb (0.5kg) ...

Pannier racks are designed to fit all years of Husqvarna 701 Enduro & SMC. Features: Designed to mate seamlessly with PerunMoto Tail Rack 3/4"...

Submount for Ducati DX converts the top clamp bolt pattern and allows mounting of a Scott's Stabilizer with minimal bar height change.   This is a ...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum.  Fitment: Ducati:  Desert X - All Years Featur...

Production in process. Expected availability date 3/27/23 The new 2023 890 Adventure R/S/Rally got a facelift so we created a new device mount to l...

Oversized and Lowered Billet Footpegs machined from 7075 High Strength Aerospace Grade Aluminum.  Aprilia: Aprilia 660 - All Years Features: 1...